Roymall Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Tools, Industrial & Scientific
0Mi piace

Kit di utensili a cambio rapido Cuniform GIB Machifit 250-000, portautensili 250 001-010 per utensili da tornio

4.1213
18.42 /22.48
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

9.69 /22.48
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

Pagamento sicuro garantito

Regalo gratuito
Regalo gratuito con ogni acquisto
Politica di spedizione
Spedizione standard gratuita per ordini superiori a $9.9
Politica di reso
Gli articoli resi saranno accettati entro 40 giorni dalla data di ricezione della merce. Gli articoli personalizzati non possono essere restituiti o scambiati. Gli articoli acquistati con una carta regalo elettronica sono solo scambiabili; i rimborsi non sono applicabili.

Regalo gratuito

Benvenuto su Roymall, il tuo sito professionale per l'acquisto di regali premium da grandi magazzini. Apprezziamo molto il tuo supporto e vogliamo esprimere la nostra gratitudine aggiungendo un tocco extra di eccitazione ai tuoi acquisti. Quando fai acquisti con noi, non solo godi di prodotti di alta qualità che migliorano il tuo stile di vita, ma riceverai anche un regalo esclusivo con ogni ordine che effettui. Pronto a esplorare la nostra collezione e trovare i tuoi regali perfetti? Sfoglia la nostra selezione di articoli premium da grandi magazzini, effettua il tuo ordine e attendi con impazienza l'arrivo del tuo regalo gratuito insieme al tuo acquisto.

Politica di spedizione

Ci impegneremo a consegnarti gli articoli dopo aver ricevuto i tuoi ordini e assicurarci che arrivino in sicurezza. I dettagli di consegna saranno forniti nella tua email di conferma.Nella maggior parte dei casi, gli ordini vengono elaborati entro 2 giorni. In circostanze speciali, potrebbe essere ritardato come segue: Quando effettui un ordine il sabato, la domenica o nei giorni festivi, sarà ritardato di 2 giorni.Normalmente, sono necessari 5-7 giorni lavorativi (da lunedì a venerdì) senza essere influenzati da ritardi nei voli o altri fattori ambientali.Poiché il nostro servizio di spedizione è globale, i tempi di consegna dipenderanno dalla tua posizione, quindi potrebbe richiedere alcuni giorni e ti chiediamo pazienza se ti trovi in distretti o paesi remoti.

1. Politica di reso e scambio

Accettiamo solo articoli acquistati su roymall.com. Se acquisti dai nostri distributori locali o altri rivenditori, non puoi restituirli a noi. Gli articoli in vendita finale o i regali gratuiti non sono accettati per il reso.Per essere idoneo al reso, il tuo articolo deve essere inutilizzato e nelle stesse condizioni in cui lo hai ricevuto. Deve anche essere nella confezione originale.Dopo aver ricevuto le istruzioni di reso da parte nostra, per favore impacchetta gli articoli resi e consegna il pacco all'ufficio postale locale o a un altro corriere.
Elaboreremo il tuo reso o scambio dell'articolo entro 3-5 giorni lavorativi dopo averlo ricevuto. Il rimborso verrà elaborato e accreditato automaticamente sul tuo metodo di pagamento originale.Non sono accettati resi o scambi se il prodotto è stato prodotto su misura, inclusa la dimensione personalizzata, il colore personalizzato o la stampa personalizzata.Hai bisogno di ulteriore aiuto? Contattaci. service@roymall.com o Whatsapp: +447549870296

2. Politica di rimborso

Riceverai un rimborso completo o un credito del 100% dopo che avremo ricevuto e verificato il pacco restituito. Il rimborso verrà elaborato e accreditato automaticamente sul tuo metodo di pagamento originale. Si prega di notare che i costi di spedizione e qualsiasi dazio o tassa non sono rimborsabili. I costi di spedizione aggiuntivi non sono rimborsabili una volta che il pacco è stato spedito. Sei responsabile del pagamento di queste tasse e non possiamo esentarle o rimborsarle, anche se l'ordine ci viene restituito.Dopo aver ricevuto e confermato il tuo articolo restituito, ti invieremo un'email per informarti che abbiamo ricevuto il tuo articolo restituito. Ti informeremo anche sull'approvazione o il rifiuto del tuo rimborso.Se hai problemi con il processo di rimborso, contattaci. service@roymall.com o Whatsapp: +447549870296
Description:
Machifit 250-000 mini-cuniform GIB type quick change tool post and tool holders fit for woodworking lathe tools.

The quick change tool post is a main accessory of the machine tool, it is consist of tool post and many kinds of tool holders, according to the processing requirements of the workpieces, correspording tool holders are selected to finish cylindrical facing, end facing.cutting, drilling, reaming, boring as well as other processing. It realizes to mount tool outside the machine tool, it has exchange tool quickly, high accuracy , rigidity strong etc. It is satisfactory accessories in place of square turrets.

Specification:
ModelTool post: 250-000-000
Tool holder: 250-001,250-002,250- 004, 250-005, 250-007, 250-010
Typecuniform type
MaterialSteel
BlackBlack
Lathe Swing6-9"
Article250-000 GIB cuniform type Quick Change Tool Kits
Application Turning Tool
UsageCNC Machine Tool Accessories
Capacity of the tool250-000: 1/2 " cuniform Type Tool Post
250-001: 1/2 " Turning Tool Holder
250-002: 1/2 " Boring, Turning Tool Holder
250-004: 3/8" and 1/2"" Heavy Duty Boring Bar Holder
250-005: MS2 Morse Taper Tool Holder
250-007: 1/2 " Parting Blade Tool Holder
250-010: 1/2 " Knurling and Turning Tool Holder

Features:
1. Accuracy -designed to ensure repetitive accuracy.
2. Quickly and easily installed on a lathe engine, bench or tower for a wide range of operations.
3. Size M10 and ideal for most mini machines, although modifications may be necessary for some machines
(sleeve or a new center rod for a smaller hole may be necessary.)
4. Reduce installation time - instant change from one operation to another.
5. Fully interchangeable with Aloris, Dorian, Phase II, Yuasa and most of the other components of the manufacturer.
6. All working parts are accuracy and hardened.
7. Completely sealed for maintenance-free work.
8. Rotate: The unequaled rigidity of this pillar of tools and holders ensures smoother turning without chatter or vibration.
9. Drilling: the set allows you to drill with the power of your carriage, instead of manual work or tailstock.
10. Hard cuniform Tool post design, easily centered.

Usages:
- 250-001 quick tool change holder for lathe cutting tool bits range up to 1/2 inch
This holder is suitable for working with cuniform type 250-000.
- 250-002 V hold round shank boring bars and tools as well as square tool bits to machine end face ,external, cutting, boring etc.
- 250-004 Use straight shank drilling and reaming, boring etc. Equipped with a split bushing to accommadate a boring bar of small diameter.
It grips with exteme rigidity. Cuts smoothly without chatter.
- 250-005 Drills with carriage by using power feed instead of tail stock easily centered or morse taper drills.
- 250-007 Use square tool to make slot cut off etc.
- 250-010 lt may be used for knuring, if square tool is used, it may process end face, extered cutting, boring etc.

Note:
Please note that the package included one type only.
Package Included:
1 X Tool post / Tool holder (optional: 1pc only)

TypeItem
#0250-000
01250-001
02250-002
04250-004
05250-005
07250-007
10250-010


More Details:



Tools, Industrial & Scientific Ranking
1747626586

Customer Reviews

4.90 out of 5
See all 1173 reviews
Write a Review
  • All Reviews (1173)
  • Image ( 2 )
  • Video (0)
  • All Star
    • All Star(1173)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 27/05/2020

    To start, the product fits and secures snugly in my 0xa tool post. The dovetails are well machined and polished, they even took extra time to chamfer the 90° edges and corners that could be uncomfortable when holding it & tightening a tool piece into the holder. ( Nice Job ) I tossed in a comparison piece and covered the brand name because its not important. You will notice the much more expensive 250-001 tool holder (blue tape) did not take the time to chamfer edges and inside the Dado where your tooling will rest the back is not polished and left ruff. They did however also paint/anodize the inside of the Dado. Personally I like the polished metal over more anodizing it does leave more surface exposed and possible damage can take place if you don't take care of the bare surfaces. That part will be a personal preference. Now for a couple small dislikes. The depth from front to back on the more expensive tool holder is 19.98mm the new units are 19.22 it is small but was noticeable without even measuring. I am not sure if the 0.76mm will effect the over all rigidness, or maybe lead to bending dovetails later down the road. I really hope not and would reach out to the manufacturer if an issue came up. The second issue is with the Bottom shelf of the Dado. My original Tool holder has a shelf thickness of 4mm. and the new units have a shelf thickness of 3.82. yes it is small 0.18mm. and this being one of the thinner portions of the tool holder I really wood have liked to see that at full thickness 4mm. Time will tell as I am a chronic over tightener, if the shelf will bend as I tighten the tooling secure screws, or if vibration or chatter over time will weak it to a failing point. The cost was great they arrived early, slightly under packaged for any type of impact damage that could take place in my opinion but they were well oiled and protected from moisture threats.

    Comments (0)
    Show Original
  • 11/12/2020

    This is a quality toolpost and one I am very please with so far. The tools are of a quality construction and the post holds things rock-steady.
    It does not fit the Myford ML10's stud by default as this is slightly larger than the M10 but a new stud can be purchased from a UK store online, but the base needs to ne turned down in depth by about 1.4mm as it's designed for the ML7.
    The holders are great quality and while I felt the adjustment screw was fiddly it does the job.
    my only regret now is not buying more holders 😂
    Top job Machifit and I hope you produce a sine bar now, maybe a more extensive range of gauge blocks too!

    Comments (3)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-30 of 65 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: Is there measure i.e. dimensions in milimeters ?
      A:
      No, io l'ho preso per un piccolo tornio hobbistico e vanno benissimo.
      Answered by fortedav on 25/11/2022Helpful (0)
    • 0
      Q: la vite di fissaggio è m10? fornite anche la vite? quanto è lunga? è possibile utilizzare una m8?
      A:
      I cant answer now
      Answered by CarManBy on 28/03/2022Helpful (0)
    • 0
      Q: Good day, I've stripped the allen key socket of the tensioning bolt on the 250-007 parting tool holder. Can I purchase the bolts separately?
      A:
      Hi, you will be able to purchase replacement screws from a hardware store.
      Answered by BG573244446 on 04/08/2021Helpful (0)
    • 0
      Q: Hi, Can you tell me which way the handle turns to lock the holder onto the tool post? ie if on a lathe and the handle was on the right, would you pull it towards you or push away. Thanks, Matt
      A:
      The handle to lock the tool post turns clockwise, i.e. if the situation is as you describe you would pull the handle towards you.
      Answered by BG141144820 on 15/01/2021Helpful (0)
    • 0
      Q: Hello, I bought an item FX250-000 and it came out different from the photo. The smallest wedge is down and the largest is up. The item that came inverted is bigger at the bottom and smaller at the top. The grip is to the left and the wedge goes up. How can we solve?
      A:
      Dismantle the post, place upside down and reinsert the gibs whilst turning the lock ring backwards, the gibs will drop in equally then reverse the direction of the lock ring and the gibs will be equal. If the lock ring lever is in the wrong place when done, repeat the process again as there are 3 possible positions the locking lever will rest when installed this clearing the tool holders when located.
      Answered by BG145440115 on 02/01/2022Helpful (0)
    • 0
      Q: I have a Boxford lathe with a 9 inch swing, what size would be best for this?
      A:
      Wastold it is perfect for 6 to 9 inch swing
      Answered by KDTZA on 26/07/2023Helpful (0)
    • 0
      Q: Hi, I have a question, With part is for sale here? picture? Is I the holder that you mount on the lathe? Greetings
      A:
      It is not all the items in the picture, each item is priced individually. The item shown for US ***** appears to be the flat bottom tool holder.
      Answered by Catwatcher on 29/05/2020Helpful (0)
    • 0
      Q: como para participar do grupo para comprar esse kit? Esse preço é de todas as peças, ou é de cada uma ?
      A:
      Eachpiece. You add each to cart one at a time.
      Answered by m3ch on 24/11/2020Helpful (0)
    • 0
      Q: How can I select size of the tool post (250-111) and of the tool holder (250-101) ?
      A:
      measure the height of existing tool post or centre of chuck hight taking into account the size of intended tool holders
      Answered by cassf1 on 23/01/2022Helpful (0)
    • 0
      Q: Does UK prices include VAT? Kind regards/Ulf
      A:
      yes
      Answered by stoffel on 06/08/2020Helpful (0)
    • 0
      Q: tengo un torno de1 metro de bancada No sé cuál torre comprar las herramientas son de 16 mm de alto las que yo uso me puede orientar para poder comprar la correcta?
      A:
      Estekit es para herramientas o buriles de hasta 1!2" = 12.7mm, la torre de apriete al parecer es universal para todos los modelos de porta herramienta alternos, es decir, 250-x00x que son mnCSc3nDS3oCb
      Answered by MRLNS on 26/10/2020Helpful (0)
    • 0
      Q: will this fit my grizzly g8689 benchtop mill?
      A:
      nice
      Answered by alkhaldy_sa on 19/06/2020Helpful (0)
    • 0
      Q: Do you also offer the 250-111 size?
      A:
      It's a great tool and high quality
      Answered by alkhaldy_sa on 19/06/2020Helpful (0)
    • 0
      Q: Do I get one tool post & one tool holder?
      A:
      No,you get the item or items that you buy. Each item is individually selected.
      Answered by m3ch on 14/06/2021Helpful (0)
    • 0
      Q: qe msqina é esta?
      A:
      Isbasical to substitute the original tool holder for the mini lathes from 7X10, 7x14" 7x16" i own a Grizzly mini lathe 7x14" model G0765 and decided to acquire to change and adjust more easily the heigh and the tools instead of using steel shims.
      Answered by MRLNS on 26/10/2020Helpful (0)
    • 0
      Q: Machifit 250-007 Cuniform GIB Type Quick Change Tool Tool Holder Where Can I Find Suitable Cutting Edges
      A:
      Hello, if you have any product questions, please consult the online customer service.
      Answered by The seller on 21/02/2023Helpful (0)
    • 0
      Q: Hello. How do I buy the complete kit, with all the tool holders?
      A:
      Puoi comprare il portautensili e le cartelle come preferisci, a seconda del tipo e dell'utilizzo che ne vuoi fare
      Answered by BG433418331 on 05/02/2023Helpful (0)
    • 0
      Q: when #0 will be available?
      A:
      Will coming soon.
      Answered by Latic Purdah on 20/02/2022Helpful (0)
    • 0
      Q: is all that is pictured included? if not what other parts do i need?
      A:
      No answer yet.
    • 0
      Q: Good evening I'd like to know how much the Toolkit costs: 250-000,Tool holder: 250-001 with 2 units, 250-002 with 2 units, 250-004, 250-005, 250-007
      A:
      It is optional. You can add it to the cart first.
      Answered by Uggernaut on 25/08/2021Helpful (0)
    • 0
      Q: hello is suitable for a mini lathe 7x14"? And steel or aluminum? Can you explain the function and differdnza of the tool holders? I am looking for a quick-change turret for my lathe
      A:
      Made of steel. You can check according to the dimension.
      Answered by Dobbyman_69cx on 03/05/2021Helpful (0)
    • 0
      Q: Does #07 knurling tool have changeable wheels? What wheels does it come with? Can I get straight knurl wheels?
      A:
      No, you can choose tool post or holder.
      Answered by Nelly on 02/02/2021Helpful (0)
    • 0
      Q: The machifit post stud wont fit over my myford 7 stud is there an upgrade stud
      A:
      No. You have to make your own. It's not difficult. Worst part is cutting a metric thread on the Myford. Not impossible but takes some time. I made mine from a 2" high tensile bolt and used the supplied nut. RonW
      Answered by ronwilken2 on 26/01/2021Helpful (0)
    • 0
      Q: where i can find ***** blade
      A:
      Did not have blade now.
      Answered by Mucket ymuck on 27/01/2021Helpful (0)
    • 0
      Q: If We buy 250-000, than the other tool holders is going to Come or this is Just the price for 250-000
      A:
      It is optional. 1pcs only.
      Answered by Talismanwas on 23/12/2020Helpful (0)
    • 0
      Q: IS IT A ...AXA,AXB,AXC, TYPE?
      A:
      It'sOXA, 60% of the size of an Aloris AXA. Just right for 7x10 and 7x16 mini lathes
      Answered by m3ch on 24/11/2020Helpful (0)
    • 0
      Q: Will the tool post fit the Myford ml7 lathe
      A:
      You can check according to the dimension.
      Answered by Penniferous on 27/10/2020Helpful (0)
    • 0
      Q: Will the "A2Z CNC" brand tool-holders for mini-lathes fit onto this tool post? What are the dimensions of the dovetail?
      A:
      Maybe you can check the dimension in the description.
      Answered by Jarrod22 on 21/09/2020Helpful (0)
    • 0
      Q: I want to buy Castle quick-exchange for micro lathe, what's the expedition .
      A:
      You can check the description.
      Answered by Celebration on 21/09/2020Helpful (0)
    • 0
      Q: Good afternoon! I want to buy the tool doors. I got the support. Could you send me the link? Thank you, sir.
      A:
      That's optional. You can choose the size you want.
      Answered by Maskdar on 12/09/2020Helpful (0)

    Il mio carrello Carrello (1)
    I miei preferiti I miei preferiti (0)

    Roymall Service